After installing water filter:
1. Replace the shelf to the initial position.
2.
To purchase or replace water filters (some models does not
include this piece in the refrigerator), call your Service
center. Refer to the Warranty Card to obtain the telephone
number of the Service center near you and ask for part
no. ADQ72910901.
After installing filter, turn on household water supply.
3. Dispense 2.5 gallons (9.46 L) of water to purge the
system, depressing and releasing the dispenser button in
cycles of 30 seconds ON and 60 seconds OFF. Open the
refrigerator door and check the shelf area for leaks.
USING YOUR REFRIGERATOR
24
Installing the water filter
Remove red cap from the filter and insert the two tabs on
the filter tip into the two slots in the refrigerator filter
receptacle. You should feel the filter entering completely.
Turn the filter clockwise to lock it into place. The Lock
symbol will be lined up with the indicator arrow.
To Next Page
Loading...
Need help?
General
