16) Poor Cooling in Refrigerator section
CHECKING FLOW RESULT & SERVICE ACTION
Check the conditions of gasket in refrigerator door
(gaps, damage, deformed).
1
2
NO.
Check the sensor resistance value in CON 7.
5
1) Open freezer door.
2) Press manually the freezer door S/W.
3) Check the air flow.
4
3
Result
Service Action
Go to Step 2
Ok
Abnormal
Fix up (if possible) or
change the Gasket
Reset product, then, enter to TEST MODE 1
(Press once).
Refer to temperature chart for Refrigerator Sensor.
Result
Service Action
Go to Step 3
Ok
Abnormal
Check section “3”
Abnormal Refrigerator
Sensor
Result
Service Action
Go to Step 4
Entered
Not entered
Execute DISPLAY
CHECK MODE, check
the result and match with
related error
ALL LED ON
Result
Service Action
Go to Step 5
Air flow
No Air flow
Go to Step 6
1) Open freezer door.
2) Press manually the refrigerator door S/W,
wait 10 seconds.
3) Check the air flow.
Result
Service Action
Go to Step 8
Air flow
No Air flow
Go to Step 7
- 104 -
To Next Page
Loading...
