35OPERATION
ENGLISH
Loading the Cutlery Rack (On
Some Models)
The cutlery rack is best suited for atware and most
cooking or serving utensils. It can also t small prep
bowls and lids. The separators on the cutlery racks
help keep atware separated to avoid damage and
improve cleaning.
NOTE
• For best cleaning performance, place atware in the
silverware baskets. Heavily soiled utensils or items
with baked on foods should be placed in the middle
rack or spoon basket for best performance.
Loading 10 Place Settings
Height Adjustable Tray (On Some
Models)
The tray on the left side can be adjusted to a high
or low position to accommodate utensils or cutlery of
different sizes. Remove dishes before adjusting the
tray. Adjust the tray by sliding the lever.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more space
is needed on the upper rack for larger items.
Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then, lift the
front of the rack so that the rollers clear the stop on
the end of the rail. The rack can now be slid forward
and removed from the rails.
WARNING
• Be careful when loading and unloading items
with sharp edges. Load sharp knives with the
blade down to reduce the risk of injury.
To Next Page
Loading...
Need help?
General
