76 LIMITED WARRANTY
Oven or racks are
stained after
using aluminum
foil
Aluminum foil has melted in the oven
• Never cover the oven bottom or cover an entire rack with materials such as
aluminum foil.
• If the foil has already melted onto the oven, it will not affect the performance of
the oven.
Flame or power is
weak
Gas pressure may be weak
• Check with gas supplier first.
Surface is not level
Oven is tipping
Range not leveled
• Check with installer first.
• Use carpenter’s level
a to check level.
Anti-tip device not installed correctly
a Approximately 0.65" (16.5 mm)
b Level both sides of range
c Screw must enter wood or concrete
d Anti-tip bracket
e Wall plate
• Check with installer first.
Problem Possible Cause & Prevention
To Next Page
Loading...
Need help?
General
