Features of the Remote Control- Door Open
OPERATION DISPLAY
Displays the operation conditions.
START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
OPERATION MODE SELECTION
BUTTON
Used to select the operation mode.
ON/OFF TIMER BUTTONS
Used to set the time of starting and
stopping operation.
TIME SETTING BUTTONS
Used to adjust the time.
TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired
time is obtained and to cancel the Timer
operation.
AIR FLOW DIRECTION START/STOP
BUTTON
Used to stop or start louver movement
and set the desired up/down airflow
direction.
SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
Used to circulate the room air without
cooling or heating (turns indoor fan
on/off).
ROOM TEMPERATURE CHECKING
BUTTON
Used to check the room temperature.
RESET BUTTON
Used prior to resetting time or after
replacing batteries.
To Next Page
Loading...
