7
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips
To raise the temperature
To lower the temperature
Cooling Auto Soft Dry Heating
(Heat pump model only)
How to use the Operation Mode Selection button
Press the Start/Stop button.
The unit will respond with a beep.
To select Cooling Operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shiftedinthedirectionofthearrow.
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°Cin1°C
increments.
You can select the fan speed in four steps-low, medium, high, or
CHAOS. Each time the button is pressed, the fan speed mode is
shifted.
Cooling Operation
1
2
3
4
To Next Page
Loading...
