POWER
Operation starts when this button is pressed and stops when you
press the button again.
FAN SPEED SELECTOR
For increased power while cooling,select a higher fan speed.
3 steps:High
―Low―Med.
ON/OFF TIMER
The Timer can be set to start and stop the unit in hourly increments
（up to 12 hours）．
You will usually use shut-off time while you sleep.
For your sleeping comfort，once timer is set ，the temperature setting will
raise 2
F after 30min and once again after another 30min.
OPERATION MODE SELECTOR
Energy Saver:
Approximately every 3 minutes the fan will turn on
and check the room air tedetermine of cooling is need.
The fan stops when the compressor stops cooling.
To Next Page
Loading...
