8
CONTROL PANEL FEATURES
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your
oven, become familiar with the various features and functions of the oven as described below.
NOTE:
• Press CLEAR/OFF pad. Allow the oven to cool for one hour.
Put back into operation.
• If the function error code repeats, disconnect the power to
the oven and call for service.
• If the oven was set for a timed oven operation and a power failure
occurred, the clock and all programmed functions must be reset.
• The time of day will flash and PF will appear in the display when
there has been a power failure.
OVEN LIGHT: Use to turn the oven lights on and off.
START: Use to start all oven features. Activate the
CONTROL LOCK for 4 seconds holding.
TIMER ON/OFF: Use to set or cancel the timer.
CLEAR/OFF: Use to stop cooking or cancel the setting of
the oven.
Touch Screen: Show the time of day, main menu, and oven
temperature; whether the oven is the bake, broil or self-
cleaning mode; and the times set for the timer or automatic
oven operations. The display panel will go into a "sleep"
mode if no activity. Touch the display once to activate and
again to make your selection.
Bake: Use to select the normal bake mode.
Broil: Use to set the variable broil mode.
Roast: Use to select the normal roast mode.
Conv. Bake: Use to select the convection bake mode.
Crisp Conv.: Use to select the crisp convection mode.
Conv. Roast: Use to select the convection roast mode.
Recipe Bank: Use to recall the recipe category of gourmet
food.
Proof/Warm: Use to proof bread / Use to hold food warm.
Healthier Roast: Use to select the healthier roast mode.
My Menu: Use to save or recall the favorite 10 cook mode.
Set up: Use to change the special settings.
Self Clean: Use to select the self-cleaning cycle.
To Next Page
Loading...
Need help?
General
