EasyManua.ls Logo

LG LZ-H025GBA4 - Page 14

LG LZ-H025GBA4
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Duct to OA
Main body
Heat insulating material
Aluminium
Duct connection flange
Rapid bending Excessive bending
Too close bending
to outlet
Rapid reduction of
duct diameter
CAUTION:
• Check that there are no foreign materi-
als (paper, vinyl, etc) or cutoff powders
in the duct before connecting the duct.
• Take care so that shock may not be
applied to the damper plate within the
main body when performing the duct
connection work.
• It is recommended to perform adiabat-
ic treatment even to the duct pipe at
the indoor side where ambient temper-
ature is expected higher than room
temperature when the main body of
the ventilation system for cooling in
summer.
• Take care so that work may not be per-
formed as in the left figure. Otherwise,
it may cause reduction of air volume
or abnormal noise.
CAUTION:
In -10℃ below ambient temperature, when ventilation is installed the equivalent space in
the outdoor and outdoor, It may cause condensation, you must install drainage facili-
ties(drain pan) and MD(Motorized Damper) at SA/RA duct.
14 Ventilator
Installation

Other manuals for LG LZ-H025GBA4

Related product manuals