To Next PageTo Next PageHow to troubleshoot LG Air Conditioner failure in operation?
If your LG Air Conditioner fails to operate, start by checking the power line and reconstruct the power if necessary. Then, inspect the wiring of the PCB remote controller switch, wiring it in accordance with the power wiring diagram. Finally, check if the fuse is disconnected and replace it if needed.
Why is my LG Air Conditioner failing in total heat exchange?
The LG Air Conditioner might fail in total heat exchange due to a few reasons. First, ensure that it is not in normal ventilation mode; if so, convert the function to total heat exchange mode. Second, check if the damper is working correctly by observing its operation during alternating total heat exchange and normal ventilation. Lastly, inspect the PCB remote controller switch wiring and ensure it is wired according to the power wiring diagram.
What to do if LG LZ-H080GBA2 Air Conditioner supply/exhaust fan is not working?
If the supply or exhaust fan in your LG Air Conditioner isn't working, check the fan motor. Rewire the motor connector if separated, and replace the motor if it's inferior. Also, consider if the unit is in defrosting operation by checking the thermistor and the outdoor temperature.
What causes LG Air Conditioner damper operation failure?
A failure in damper operation in your LG Air Conditioner can occur if the connector to the PCB is disconnected. Rewire the damper connector, and replace the connector if it's inferior. Also, check if the unit is in defrosting operation by checking the outdoor temperature.
General| Refrigerant | R32 |
|---|---|
| Cooling Capacity (BTU) | 8, 000 BTU |
| Power Supply (V/Hz/Ph) | 220-240V/50Hz/1Ph |
| Cooling Capacity | 2.3 kW |
| Power Supply | 220-240V, 50Hz, 1 Phase |
