Don't connect the
ground wire to the
window frame or water
cock.
• There is risk of electric
shock.
Do not install the prod-
uct at a smoky and
oily place like kitchen
or factory.
• Otherwise. oil may
adhere to the filter or
heating exchanger and
cause trouble.
Install the product in
an insulated space
from outdoor air.
•
In case of installing the
product outside of the
insulated layer, dewing
occurs inside of the main
body in winter.And it caus-
es electrical shock or
falling of condensed water.
Installation
Keep level even when
installing the product.
• To avoid vibration or
water leakage.
Use two or more peo-
ple to lift and transport
the product.
• Avoid personal injury.
Do not install the prod-
uct where it will be
exposed to sea wind
(salt spray) directly.
• It may cause corrosion on
the product. Corrosion,
particularly on the con-
denser and evaporator
fins, could cause product
malfunction or inefficient
operation.
Use a soft cloth to
clean. Do not use
harsh detergents, wax
or thinner, etc.
• Otherwise, color or sur-
face of the oroduct mav
deteriorate.
Clean the filter and the
heat exchanger regu-
larly and use the
gloves for cleaning.
• Adhering to a mass of
dust may cause the dete-
rioration of air volume.
Do not use the product
for special purposes,
such as preserving
foods, works of art, etc.
It is a consumer venti-
lator, not a precision
refrigeration system.
• There is risk of damage
or loss of property.
Operation
Do not block the inlet or outlet of air
flow.
• It may cause product failure.
Do not step on or put anyting on the
product.
• There is risk of personal injury and fail-
ure of product.
Safety precautions
6 Ventilator
To Next Page
Loading...
