Rear side of the Product
Component Cable
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 14).
Connecting to Set-top Box /DVD (480i/576i/480p/576p/720p/1080i)
Set-top Box /DVD
•
Connect the input terminal with a proper color match.
(Not included)
1.
Audio Cable
(Not included)
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
•
Select Component
2.
Input
TV
AV
Component
RGB
MENU
INPUT OK
INPUT OK
Each time you press the Input button it will change to TV AV Component RGB
If nothing is inputted for several seconds the screen will automatically move to the selected menu.