18
Connecting to External Devices
Connect the D-sub cable, RCA/PC cable as shown in the below figure
and then connect the power cord. (see page 14)
Connecting to
DVD/SET-TOP BOX
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the topside of the product.
2.
1.
INPUT OK
INPUT OK
[Rear side of the Product]
[Set-top Box/DVD]
D-Sub cable
RCA-Stereo
cable
(not included)
•
Select RGB
Input
TV
AV
Component
RGB
OK
Each time you press the Input button it will change to TV AV Component RGB
If nothing is inputted for several seconds the screen will automatically move to the selected menu.