Name of the Remote Control Buttons
I/II : Bilingual choice and sound mode selection
[TV]
To switch from Stereo to Mono sound in case of stereo
transmission,
or from Nicam Stereo to Nicam Mono, in case of digital
transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in
case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case of bilingual
transmission :
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV]
In AV/Component mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
L+L :
Audio signal from audio L input is sent to left and right loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
LIST : Programme list
To display the programme list (0~ 99).
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Programme List
OK MENU
0 C 01 5 C 07
1 C 35 6 C 50
2 C 05 7 C 51
3 C 11 8 C 41
4 C 04 9 C 63
To Next Page
Loading...
