78
PICTURE CONTROL
PICTURE CONTROL
Expert Pattern
(Off/Expert 1/Expert 2)
■ This is the pattern necessary for expert adjustment.
■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature
(Medium/Warm/Cool)
■ This is the function to adjust the overall colour of the screen to the
feeling you want.
a. • Method: 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness :
The adjustment range is -50 to +50.
b. • Method: 10 point IRE
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of
the video signal and can be set among 10, 20, 30 to 100. You can
adjust Red, Green or Blue according to each setting.
• Red/Green/Blue: The adjustment range is -50 to +50.
Colour Management
System
■ As the tool used by the experts to make adjustments by using the
test patterns, this does not affect other colours but can be used to
selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/
Magenta/Yellow).
Colour difference may not be distinctive even when you make the
adjustments for the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta Colour: The adjustment
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range
is -30 to +30.
■ This feature is disable in RGB-PC and HDMI (PC) mode.
To Next Page
Loading...
Need help?
General
