17
EXTERNAL EQUIPMENT SETUP
When connecting with a DVI cable
Connect the DVI output of the PC to the
DDVVII--DD IINN
jack on the set.
Connect the audio cable from the PC to the
AAUUDDIIOO
IINN ((RRGGBB//DDVVII))
sockets of the set.
2
1
NOTE
GG
If the set is cold, there may be a small “flicker” when
the set is switched on. This is normal, there is noth-
ing wrong with the set.
GG
If possible, use the 1920x1080@60Hz video mode
to obtain the best image quality for your LCD moni-
tor. If used with other resolutions, some scaled or
processed pictures may appear on the screen. The
set has been preadjusted to the mode
1920x1080@60Hz.
GG
Some dot defects may appear on the screen, like
Red, Green or Blue spots. However, this will have no
impact or effect on the monitor performance.
GG
Do not press the LCD screen with your finger for a
long time as this may produce some temporary dis-
tortion effects on the screen.
GG
Avoid keeping a fixed image on the set’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use a
screen saver when possible.
To Next Page
Loading...
