LG M3200C-BAF - RS-232 C Multi-Screen Commands; Commands for PIP;PBP;POP and Position

A10
ENGLISH
14. PIP/PBP/POP On/Off(Command : n)
To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0 : OFF
1 : PIP
2 : PBP
3 : POP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data 0 : OFF
1 : PIP
2 : PBP
3 : POP
15. PIP Position(Command : q)
To adjust PIP position.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0 : Bottom of the right side on screen
1 : Bottom of the left side on screen
2 : Top of the left side on screen
3 : Top of the right side on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0 : Bottom of the right side on screen
1 : Bottom of the left side on screen
2 : Top of the left side on screen
3 : Top of the right side on screen
Transmission / Receiving Protocol
▲▲