Why does my LG M1950D have picture but no sound?
If your LG LCD TV has picture but no sound, first, try adjusting the volume using the VOL(+, -) or VOL (, ) buttons. Ensure the sound isn't muted by pressing the MUTE button. Try switching to another channel, as the issue might be with the broadcast. Also, check if the audio cables are correctly installed.
Why does my LG M1950D LCD TV have no color or poor picture quality?
If your LG LCD TV has no color, poor color, or poor picture quality, try these solutions: First, adjust the color settings in the menu. Ensure there's sufficient distance between the TV and any VCR. Try changing to another channel, as the issue might be with the broadcast. Check that the video cables are correctly installed. Finally, try activating any function to restore the brightness of the picture.
What causes horizontal or vertical bars or picture shaking on LG M1950D LCD TV?
Horizontal or vertical bars, or picture shaking on your LG LCD TV can be caused by local interference. Check for nearby electrical appliances or power tools that might be causing the disturbance.
What causes horizontal or vertical bars or picture shaking on LG 3D TVs?
If you observe horizontal or vertical bars, or the picture is shaking on your LG 3D TV, check for local interference from electrical appliances or power tools.
Why LG M1950D remote control doesn't work?
If your LG LCD TV remote isn't working, try these steps: First, check for obstructions between the remote and the TV. Then, make sure you are pointing the remote correctly. Verify that the batteries are correctly installed with the right polarity (+ to -, + to -). Ensure the correct remote operating mode is set (TV, VCR, etc.). Finally, try installing new batteries.
What to do if my LG 3D TVs have no picture and sound?
If your LG 3D TV has no picture and no sound, verify that the TV is turned on and the power cord is properly inserted into the wall outlet. Try switching to another channel to rule out a broadcast issue. Check your antenna's direction and location. Finally, test the wall power outlet by plugging in another device.
Why does the picture appear slowly after switching on my LG LCD TV?
If your LG LCD TV picture appears slowly after switching it on, this is normal as the image is muted during the startup process. If the picture hasn't appeared after five minutes, contact your service center.
Why does my LG LCD TV revert to initial picture settings?
If, after changing the picture settings, your LG LCD TV automatically reverts to the initial settings, it means the TV is in Store Demo mode. To switch to Home use mode, go to the TV Menu, choose OPTION, then Initial Setting, and finally choose Home use.
How to fix LG M1950D LCD TV remote control that doesn’t work?
If the remote control for your LG LCD TV isn't working, check for obstructions between the remote and the TV. Make sure you're pointing the remote correctly and that the batteries are installed with the correct polarity. Verify the remote operating mode (TV, VCR, etc.) is correctly set. If problems persist, install new batteries.
How to remove lines or streaks in pictures on LG M1950D LCD TV?
To address lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction.
To Next Page
General
