Why is there no sound when connecting HDMI or USB to my LG M1950D?
If there's no sound when connecting HDMI or USB to your LG LCD TV, ensure your HDMI cable is a High Speed HDMI Cable. Also, check that your USB cable is over version 2.0, and make sure you are using a normal MP3 file.
Why does my LG M1950D LCD TV power off suddenly?
If your LG LCD TV suddenly turns off, check if the sleep timer is set and review the power control settings. A power interruption may also be the cause. Note that the TV will automatically switch off after 15 minutes without an input signal to save power. If you were playing a broken file from a USB, check the file. Ensure that the screen off mode of the energy saving menu is disabled.
How to fix LG 3D TVs remote control when it's not working?
If the LG 3D TV remote control isn't working, first, make sure there are no obstructions between the remote and the TV. Ensure you're pointing the remote correctly and that the batteries are installed with the correct polarity. Try setting the correct remote operating mode (TV, VCR, etc.) and installing new batteries.
How to fix LG M1950D LCD TV remote control that doesn’t work?
If the remote control for your LG LCD TV isn't working, check for obstructions between the remote and the TV. Make sure you're pointing the remote correctly and that the batteries are installed with the correct polarity. Verify the remote operating mode (TV, VCR, etc.) is correctly set. If problems persist, install new batteries.
What to do if my LG LCD TV has no picture and no sound?
If your LG LCD TV has no picture and no sound, first, ensure the TV is turned on. Then, try another channel as the problem may be with the broadcast. Check if the power cord is properly inserted into the wall power outlet. Verify your antenna's direction and/or location. Finally, test the wall power outlet by plugging in another product's power cord.
How to remove lines or streaks in pictures on LG M1950D LCD TV?
To address lines or streaks in the picture on your LG LCD TV, check the antenna and try changing its direction.
How to fix poor reception on some channels on LG M1950D?
If you're experiencing poor reception on some channels with your LG LCD TV, it could be due to a few reasons. The station or cable product might be experiencing problems, so try tuning to another station. Alternatively, the station signal could be weak, so try reorienting your antenna to better receive the weaker signal. Also, check for any potential sources of interference.
Why does picture appear slowly after switching on LG M1950D?
The image is muted during the product startup process. If the picture has not appeared after five minutes, contact your service centre.
Why does my LG M1950D power suddenly turn off?
If your LG LCD TV is suddenly turning off, check these potential causes: See if the sleep timer is set. Review the power control settings. Consider if there was a power interruption. Note that the TV will automatically switch off after 15 minutes without an input signal to save power. Also, a broken file played in USB mode might cause this, so check your USB storage. Finally, make sure the screen off mode of the energy saving menu is disabled.
What to do if LG M1950D LCD TV has no picture and no sound?
If your LG LCD TV shows no picture and has no sound, first check if the TV is turned on. Try switching to another channel to rule out a broadcast issue. Ensure the power cord is properly inserted into the wall power outlet. Also, check your antenna's direction and/or location. Finally, test the wall power outlet by plugging another product into it.
To Next Page
General
