13
13
Connecting to External Devices
When connecting with an BNC cable.
•
Select AV.
A
Connect the video cable as shown in the below gure and then connect the power cord
(See page 10).
When connecting with a BNC cable.
•
Connect the input terminal with a proper color match.
A
BNC Cable
(not included)
Product
VCR/DVD Receiver
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the back of the product.
• When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.
Note
Audio Cable
(not included)
Input
AV
RGB PC
HDMI/DVI
▲▼
INPUT SET
▼▲
Video Input
SOURCE
AUTO/SET
▼▲
To Next Page
Loading...
