26
Sleep
Time
Auto
Sleep
Power
On Delay
Adjusting the timer function
• In the event of power interruption (disconnection or power failure), the clock must be reset.
• Once the on or off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• When On time is operated, input screen is turned on as it was turned off.
Note
The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use button to select the Sleep Time menu.
2) Press the button and then use button to set the hour(00~23).
3) Press the button and then use button to set the minutes(00~59).
If Auto Sleep is active and there is no input signal, the set switches to off mode automatically
after 10 minutes.
1) Press the MENU button and then use button to select the Auto Sleep menu.
2) Press the button and then use button to select On or Off.
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Time
Sleep Time
Auto Sleep
Power On Delay
Power Saving
Off
User Menus
MENU
To Next Page
Loading...
