LG M5500C User Manual

ENGLISH
Select an input signal.
Press the SOURCE button on the remote control to select the input signal.
Or, press the SOURCE button at the front side of the product.
SOURCE SET
When connecting with a DVI-D signal input cable.
• Select DVI : DVI-D digital signal.
When connecting with a D-Sub signal input cable.
• Select RGB1 : 15-pin D-Sub analog signal.
• Select RGB2 : 15-pin
D-Sub analog signal.
• How to connect to two computers.
Connect the signal cables (DVI and D-Sub) to each computer.
Press the SOURCE button in a remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a
ground wire.
Note
Turn on power by pressing the power button on the product.
Turn on the PC.
Power button
B
A
B1
A
SOURCE SELECT
B2
C

LG M5500C Specifications

General

Brand	LG
Model	M5500C
Category	Monitor
Language	English