To Next PageTo Next Page
Need help?Do you have a question about the LG Multi V ARNU183M2A4 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | Multi V ARNU183M2A4 |
| Category | Air Conditioner |
| Language | English |
Provides safety instructions and table of symbols for installation.
Critical safety rules for unit installation.
Further important safety guidelines and warnings for installation.
Crucial safety rules for electrical wiring and grounding.
Safety guidelines for operating the unit correctly.
Emphasizes personnel safety and installer requirements.
Overall guidelines for installing the units.
Guidelines for choosing the proper installation location.
Steps for installing the ducted indoor unit chassis.
Safety warnings for securing the unit chassis during installation.
Steps for unit mounting and initial placement.
Instructions for vertical installation of MA Chassis units.
Wiring instructions for the MA chassis conversion kit.
Standard practices for mounting air handler units.
Safety guidelines for refrigerant and concentration limits.
Steps and precautions for preparing refrigerant piping.
Step-by-step guide for making proper flare fittings.
Safety considerations and procedures for refrigerant brazing.
Safe and effective brazing techniques for refrigerant lines.
Guidelines for cable separation to prevent interference.
Guidelines for connecting power and communication cables.
Proper methods for connecting power wires.
Best practices for terminal connections.
Specifications for power supply and wiring.
Correct method for connecting communication cables.
Guidelines for wiring multiple indoor units for group control.
Overall procedure for connecting power and communication wiring.
Step-by-step guide for connecting power wiring.
Further steps in the wiring connection process.
Setup for LGRED, HRU compatibility, and Gen 4 DIP switches.
Guidelines for installing wired remote controllers.
How to set DIP switches for group control.
Checklist items for the initial installation phase.
Items to check during the rough-in installation phase.
Items to verify for refrigerant piping.
Items to verify for the condensate system.
Checklist items for electrical and control setup.
Items to verify for electrical installations.
Items to verify for zone controller setup.
Items to verify for the control panel.
