56
ELECTRICAL WIRING
ENGLISH
Installation of IO Module(optional)
① Assemble IO Module and bracket.
② Fix the bracket on designated location with two clamp cords(105mm).
③ Connect the connection wires according to the instructions.
(Please refer to Setting and Using Method)
- About more information of IO Module, please refer to IO Module manual.
CAUTION
Be sure to turn off outdoor unit power before installation.
!
+
+
※Pictures may differ depending on the model.
1,MFL67798018,영영 2018. 6. 15. 영영 2:28 Page 56