To Next PageTo Next Page
Need help?Do you have a question about the LG multi V ARUN Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Inverter Compressor | Yes |
| Outdoor Unit Dimensions (W x H x D) | Varies by model |
| Outdoor Unit Weight | Varies by model |
| Sound Pressure Level (Outdoor Unit) | 54 - 65 dB(A) (depending on model) |
| Operating Temperature Range (Cooling) | -5°C to 48°C |
| Cooling Capacity | 2.5 kW - 22.4 kW |
| Heating Capacity | 2.8 kW - 25.0 kW |
| Power Supply | 50/60 Hz |
| Operating Temperature (Cooling) | -5°C to 48°C |
| Indoor Unit Noise Level | Varies depending on indoor unit type and model |
| Outdoor Unit Noise Level | 54 - 65 dB(A) (depending on model) |
| Indoor Unit Dimensions (W x H x D) | Varies depending on indoor unit type and model |
| Indoor Unit Weight | Varies depending on indoor unit type and model |
| Connectivity | Wi-Fi |
Important safety instructions and warnings for the installation process.
Safety precautions related to operating the air conditioner.
Safety guidelines for safely transporting the outdoor unit.
Procedures for foundation work, unit mounting, and airtight testing.
Steps for vacuum drying, electrical work, and refrigerant piping installation.
Steps for cutting, deburring, flaring pipes, and connecting them.
Details on unit specifications, power supply, and combination ratios.
Guide to checking and setting DIP switches for various functions.
Procedure for setting unit addresses automatically.
Information on R410A refrigerant, location choice, and installation space.
Guidelines for refrigerant piping, connections, and sizing.
Calculating refrigerant, leak prevention, and limiting concentration.
Important cautions regarding electrical grounding, connections, and qualified personnel.
Example wiring diagrams for different unit configurations and frequencies.
Wiring diagrams for UX1, UX2, and UX3 chassis, showing power and communication line connections.
Step-by-step guide for performing test run functions like auto charging and sensor checks.
Explanation of sensor error displays and common error codes for troubleshooting.
Guide for diagnosing and resolving common test run failures.
Details on new functions like Cool/Heat selector and ODU Dry contact.
Explanation of Demand Control and Night Low Noise operation methods.
Guidelines for installing units in seaside locations to prevent corrosion.
