To Next PageTo Next Page
Need help?Do you have a question about the LG Multi V 5 ARUM200LTE5 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | Multi V 5 ARUM200LTE5 |
| Category | Air Conditioner |
| Language | English |
Crucial safety warnings and precautions for installation.
Hazards associated with unqualified installation or repairs.
Guidelines for electrical work, professional installation, and grounding.
Precautions against wind, earthquake, gas, and refrigerant handling.
Safety regarding wet hands, water, sharp edges, and installation environment.
Precautions for operation, unit handling, transportation, and packing disposal.
Safety measures for electrical connections and operational procedures.
Step-by-step guide for the installation procedure.
Procedures and safety measures for installing the unit foundation.
Steps for cutting pipes, removing burrs, and performing flaring work.
Requirements for piping materials and key principles for installation.
Precautions and valve operation for heat pump system piping.
Precautions for refrigerant amount, purging, insulation, and valve operation.
Precautions and valve operation specific to heat recovery systems.
Connecting pipes between HR units, outdoor units, and indoor units.
Guidelines on materials, diameter, and refrigerant handling when moving units.
Methods for drawing pipes out from the front side.
Methods for drawing pipes out from the bottom side.
Guidelines for selecting pipe diameters based on length and capacity.
Tables specifying pipe diameters based on ODU capacity and conditions.
Detailed pipe connection methods and diameter requirements.
Tables for selecting pipe diameter from ODU to the first branch.
Tables for selecting pipe diameter from the first branch to subsequent branches.
Details on Y branch fitting, installation, and insulation.
Details on header fitting, insulation, and connection procedures.
Illustrations of horizontal, vertical, and other distribution methods.
Procedures and settings for vacuum mode operation.
Steps for performing a leak test using nitrogen gas.
Detailed steps for vacuum drying the system.
Information on error indicators, display methods, and error codes.
List of errors specific to indoor units and their causes.
List of errors related to the outdoor unit inverter and heatsink.
List of errors related to the outdoor unit fan, communication, and sensors.
Errors related to network connections and HR units.
Safety guidelines against refrigerant leaks and concentration limits.
Steps to calculate and check refrigerant concentration limits.
