To Next PageTo Next Page
Need help?Do you have a question about the LG Multi V 5 ARUM240LTE5 and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Model | ARUM240LTE5 |
| Type | Multi V 5 |
| Refrigerant | R410A |
| Indoor Unit Dimensions (W x H x D) | Varies by indoor unit model |
| Indoor Unit Weight | Varies by indoor unit model |
General warnings and cautions for using the appliance safely, including injury and death risks.
Safety rules for installation work, emphasizing qualified personnel, proper tools, and circuit requirements.
Details on securing the unit with bolts, using H-beam supports, and anti-vibration materials.
Information on the required size and placement of anchor bolts for the outdoor unit.
Procedures for cutting pipes and performing flaring work, including burr removal.
Table specifying correct tightening torques for flare nuts to prevent leaks or damage.
Guidelines for connecting pipes, including using charge hoses, two wrenches, and R410A oil.
Guidelines for electrical work, including grounding, wiring regulations, and avoiding noise interference.
Recommendations for spacing power and communication cables to prevent operational faults.
Specifications for main power supply, voltage, and equipment capacity, including wire sizing.
Wiring diagrams for single outdoor units, showing connections for power supply and indoor units.
Step-by-step instructions for performing automatic addressing of indoor units.
Procedure for automatically detecting pipe connections between HR and indoor units.
Manual methods for detecting and addressing pipe connections when automatic fails.
Explains error codes displayed on indoor units, remote controllers, and outdoor unit LEDs.
Lists and explains error codes specific to indoor units, including sensor and communication failures.
Details on outdoor unit errors, including inverter, compressor, sensor, and fan faults.
Continues listing outdoor unit errors, covering discharge, superheat, IPM, and communication faults.
Lists errors related to network communication and HR unit specific issues.
Defines refrigerant concentration limits and outlines countermeasures for leaks.
Steps to calculate refrigerant concentration and determine room capacity.
