EasyManua.ls Logo

LG Multi V IV PRHR041 User Manual

LG Multi V IV PRHR041
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P/NO : MFL67221416
INSTALLATION MANUAL
AIR
CONDITIONER
www.lg.com
Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it
thoroughly.
Original instruction
For more information, Refer to the CD or LG Web site (www.lg.com).
[Representative] LG Electronics Inc. EU Representative : LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu, Changwon-si,
Gyeongsangnam-do, KOREA
ENGLISH
ITALIANO
ESPAÑOL
FRANÇAIS
DEUTSCH
ČEŠTINA
ΕΛΛΗΝΙΚΆ
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the LG Multi V IV PRHR041 and is the answer not in the manual?

LG Multi V IV PRHR041 Specifications

General IconGeneral
BrandLG
ModelMulti V IV PRHR041
CategoryAir Conditioner
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Warnings and Cautions

Essential safety warnings and cautions for installation, operation, and general use.

Installation Specific Guidelines

Detailed requirements and procedures for safe installation of the unit.

OPERATION SAFETY PRECAUTIONS

General Operation Guidelines

Important safety measures and precautions for operating the air conditioner.

Installation Cautions During Operation

Additional installation precautions to consider during operation.

INSTALLATION PROCESS OVERVIEW

SELECT THE BEST LOCATION

HR UNIT INSTALLATION LOCATION

INSTALLATION SPACE REQUIREMENTS

Individual Installation Space

Specific space requirements for individual unit installations based on wall configurations.

OUTDOOR UNIT INSTALLATION

Anchor Bolt Location and Foundation

Details on anchor bolt placement and foundation requirements for unit stability.

Piping Preparation

Procedure for preparing refrigerant pipes, including cutting and flaring work.

PIPE CONNECTION AND FLARE TORQUE

REFRIGERANT PIPING INSTALLATION

OUTDOOR UNIT CONNECTIONS

REFRIGERANT PIPING INSTALLATION DETAILS

ZONING CONTROL INSTALLATION

PREPARATION AND PIPE CONNECTIONS

REFRIGERANT PIPING SYSTEM CONFIGURATIONS

REFRIGERANT PIPE DIAMETER SELECTION

OUTDOOR UNIT PIPE CONNECTION METHODS

REFRIGERANT AMOUNT CALCULATION AND CHARGING

Calculating Refrigerant Amount

Formula and steps to calculate the required amount of refrigerant for the system.

Refrigerant Charging Process

Steps and precautions for charging refrigerant into the system using manifold gauges.

BRANCH PIPE FITTING PROCEDURES

LEAK TEST AND VACUUM DRYING PROCEDURES

Leak Test Procedure

Methodology for conducting a leak test using nitrogen gas and checking for pressure drops.

Vacuum Drying Procedure

Steps for vacuum drying the system to remove moisture and air, including vacuum pump usage.

VACUUM MODE OPERATION

ELECTRICAL WIRING AND SAFETY

Electrical Wiring Precautions

Important safety precautions and adherence to regulations for electrical wiring.

POWER WIRING AND CABLE MANAGEMENT

MAIN POWER SUPPLY AND EQUIPMENT CAPACITY WIRING

FIELD WIRING CONFIGURATIONS

COMMUNICATION AND POWER CABLE CONNECTIONS

OUTDOOR UNIT SETTING VERIFICATION

HR UNIT PCB AND SETUP SWITCHES

AUTOMATIC ADDRESSING AND MANUAL PIPE DETECTION

Automatic Addressing Procedure

Steps to perform automatic addressing of indoor units, including system power and button operations.

Manual Pipe Detection and Addressing

Methods for manual pipe detection and valve addressing, including non-zoning and zoning settings.

MANUAL PIPE DETECTION AND ADDRESSING

MANUAL VALVE ADDRESSING EXAMPLES

VALVE ADDRESS AND PIPE DETECTION VERIFICATION

MASTER INDOOR UNIT ZONING SETTINGS

UNIT SETTING FUNCTIONS

SELF-DIAGNOSIS FUNCTION

Error Indicators and Display

Understanding error codes, indicators on units and remotes, and their meanings.

Outdoor Unit Related Errors

List and causes of errors related to the outdoor unit and its components.

HR Unit Related Errors

REFRIGERANT LEAK CAUTIONS AND MANAGEMENT

Refrigerant Leak Introduction and Limiting Concentration

Understanding refrigerant leaks and the concept of limiting concentration for safety.

Limiting Concentration Checking Procedure

Steps to check refrigerant limiting concentration and take appropriate measures.

INSTALLATION GUIDE AT THE SEASIDE