- 30 -
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Function
4.4 220 V out for solenoid valve
Mode setting method
CAUTION
• Ask an authorized technician to setting a function.
• If do not use a function, set an off mode.
Master unit PCB DIP switch on : No.5
Select the mode using ‘▶’, ‘◀’ Button :
“Func” Push the ‘●’ button
Select the Function using ‘▶’, ‘◀’ Button :
“Fn3” Push the ‘●’ button
Select the Option using ‘▶’, ‘◀’ Button :
“oN”,“oFF” Push the ‘●’ button
220 V out mode is set
- oN : 220 V out mode is on
- oFF : 220 V out mode is oFF
To Next Page
Loading...
