Troubleshooting
23
Troubleshooting
4
Troubleshooting
Software Update
When the MUSICow product is connected to your home
network, check whether the rmware version is the latest on all
speakers and the Music Flow Player application.
MUSICow product might require recent rmware to be
installed for optimal operation.
[Settings
à
Version Info]: you can check if your speaker has the
latest rmware.
How can I initialize speaker?
If you press down (ADD) button until Beep sounds once,
the network related settings are initialized. (For sound bar,
“DISABLED” is displayed in the display window.)
If you press down
(ADD) button until Beep sounds twice,
factory initialization is performed. (For sound bar “RESET” is
displayed in the display window.)
Speaker is not connected.
1. For speaker that is already connected, check if the phone is
connected to the same router as the speaker, then connect
to the same router, and check the followings.
1-1. Set Power off / on, and check the connection.
1-2. If it is not solved by 1-1, close the application and run
again.
1-3. If it is not solved by 1-2, reset the Speaker and
reconnect.
1-4. If it is not solved by 1-3, delete the App, reinstall, and
try again. To reset, press and hold the
(ADD) button
for 8 seconds until you hear one beep.
NP8350B-M0.BUSALLK_SIM_MFL69154860.indd 23 2015-07-24 8:59:43
To Next Page
Loading...
