Appendix
29
Appendix
5
,
Note for Status LED’s Condition
y
When you set the group at rst, F (Function) LED turns green.
y
The additional groups are set, the F (Function) LED color is
changed in group order.
[Green > Magenta
> Cyan
> Blue > Yellow]
y
If the grouped speakers switch to the network standby mode,
the brightness of F (Function) LED gets dark.
About Ferrite Core (Optional)
This ferrite core can reduce or eliminate electrical interference.
How to attach the ferrite core
1. Pull the stopper [a] of the
ferrite core to open.
2. Wind the power cord twice
on the ferrite core.
3. Close the ferrite core until
it clicks.
NP8350B-M0.BUSALLK_SIM_MFL69154860.indd 29 2015-07-24 8:59:45
To Next Page
Loading...
