LG niagara4 MultiSITE Edge 10 - Page 44

MS- E10 User Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp. 44
Name
Value
Description
Locale
string
Determines l
ocale-specific behavior such as date and time for
matting, and also
which lexicons are used. A string entered must use the form: language
[“_”
country
[“_” variant]]
For
example U.S. English is “en_US” and traditional Spanish would be
“
es_ES_Traditional”.
F
or related details, see Oracle documentation at http://docs.
oracle.com/javase/1.4.2/docs/api/java/util/Locale.html
Engine
Watch- dog
Policy
Log
Only, Terminate (default),
Reboot
Defines response taken by the platform daemo
n if it detects a station engine
watchdog timeout. With the watchdog, the station periodically reports
to the
platform daemon its up
dated engine cycle count. The watchdog purpose is to
detect and deal with a “hung” or “sta
lled” station, and is automatically enabled
when the station starts
.
Log
Only — Generates stack dump and logs an error message in the system
log. (The station should ultimately be
restarted if a watchdog timeout occurs
with the “Log Only” setting).
Terminate
— (Default) Kills the VM process. If “restart on failure” is enabled
for the station (typical), the station is restarted.
Reboot
— Automatically reboots the host MS-E10 device platform. If “auto-
start” is enabled for the station, the station is restarted after the system
reboots
.
Engin
e Watch- dog
Timeout
00000h
03m (default)
In Niagara 4.x, the range is from 1 minute to many hours.
If
the station’s engine cycle count stops changing and/or the station does not
report
a cycle count to the platform daemon within this defined period, the
p
latform daemon causes the VM to generate a stack dump for diagnostic
purposes,
then takes the action defined by the Engine Watchdog Policy.
Enable
Station Auto-
Save
Enable
(default)/disable
Allows
for “auto save” of running station to “config_back-
up_<Y
YMMDD>_<HHMM>.bog” file at the frequency defined in next property.
Auto
-saved backup files are kept under that station’s folder.
Station Auto
- Save
Frequency
00024h 00m (default)
Default is
every 24 hours for any embedded MS-E10 device, range is from 1 to
many hours.
Station Auto
- Save
Versions to Keep
0
Range is 1
–
10. The oldest of kept backups is replaced upon next manual save
or auto
-save backup, once the specified limit is reached. Significant flash
space is saved by keeping this 0 or perhaps 1.
RAM
Disk
Min Free 5
(default), Size,
Status
Min Free
— Default is 5. Sets the level at which Platform Services and
Platform Admin show a warning.
Size
— Default is 64MB. Indicates the size of RAM disk used to store history
and alarm files.
Status
— current status of RAM disk