Standard Repair Process Detail Technical Manual
A18
3) Insert USB(tool option data)
4) When connected via USB, the setting menu is displayed.
Enter ‘Model name.suffix’ and ‘serial number’
5) Press IN STOP YES
2. Problem solution
1. Change tool option data
If the TV Screen is a white pattern and the pop-up window does not appear when connecting USB.
Press the “BACK" or “EXIT” on the remote controller for 3 seconds to switch to White noise screen.
1) Download tool option data from GSSC system to USB(Storage device)
Download path : GSCS → Manual → TV option Tool
2) Unzip the file(USB Device) "LG_SVC_DTV.zip"
1
2
Check items afer Main B/D (Model, Serial Number, Tool option D/L)
E. Etc
How to use the Service remote control
Established
date
Revised
date
Error
symptom
Content
A18
To Next Page
Loading...
