Check location
of noise
Identify
noise type
Circuit
noise
Replace Power B/D
Mechanical
noise
Check
location of noise
When the nose is severe, replace the module
(For models with fix information, upgrade the
S/W or provide the description)
OR
※ If there is a “Tak Tak” noise from the
cabinet, refer to the KMS fix information and
then proceed as shown in the solution manual
(For models without any fix information,
provide the description)
※ Mechanical noise is a natural
phenomenon, and apply the 1st level
description. When the customer does not
agree, apply the process by stage.
※ Describe the basis of the description
in “Part related to nose” in the Owner’s
Manual.
E. Noise
Circuit noise, Mechanical noise
Established
date
Revised date
16/17
Error
symptom
Standard Repair Process
16
Copyright © 2018 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
To Next Page
Loading...
Need help?
General
