LG OLED55C1PUB User Manual

13
Registering Magic Remote Control
How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
* If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
How to deregister the Magic Remote Control
Press the (Back) and (Home) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.
* Press and hold the (Home) and (Q. Settings) buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the
same time.
• It is recommended that an Access Point (AP) be located more than 0.2 m (0.65 ft) away from the TV. If the AP is installed closer than 0.2
m (0.65 ft), the Magic remote control may not perform as expected due to frequency interference.
Connecting Smart Devices using NFC Tagging
Using the NFC Feature
NFC is technology that uses Near Field Communication, allowing you to conveniently send and receive information without separate settings. By
bringing a smart device near the NFC-enabled remote control, you can install the LG ThinQ app and connect the device to the TV.
1 Turn on NFC in the smart device’s settings. To use NFC with Android devices, set the NFC option to enable ‘read/write tags’ in the smart device’s
settings. The NFC settings may vary depending on the device.
2 Bring the smart device near the (NFC) on the remote control. The required distance for NFC tagging is about 1 cm (0.39inches).
3 Follow the instructions to install the LG ThinQ app on your smart device.
4 Retagging the smart device to the remote control allows you to conveniently access various features on the connected TV through the LG ThinQ
app.
Note
• This feature is available for NFC-enabled smart devices only.
• This feature is only available if the remote control has an NFC logo.

LG OLED55C1PUB Specifications

General

Screen Type	oled
Color	black
Wall Mount	300mm x 200mm
Tuner	digital, atsc, clear qam
Screen Size	54.6 inches, 55 inches
Screen Technology	standard oled
Resolution	4k (2160p)
Refresh Rate	120hz
Closed Captioning	yes
HDR	yes
HDR Format	dolby vision, hdr 10, hybrid log-gamma (hlg)
Built-In Speakers	true, downward firing
Surround Sound	dolby atmos
Speakers Output	40 watts
HDMI Ports	4
HDMI 2.1 Ports	4
HDMI ARC Ports	yes
USB Ports	3
USB 2.0 Ports	3
USB 3.0 Ports	0
Ethernet	yes
RF Antenna	yes
Bluetooth	true, 5.0
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	0
Component Video Inputs	0
Composite Video Inputs	0
DVI	0
VGA Ports	0
SmartTV	webos
Streaming Services	hbo max, netflix, prime video, disney+, apple tv+, hulu, paramount+, peacock, youtube tv, spotify, iheartradio
Smart Applications	google assistant, amazon alexa, apple homekit
Other Devices Connection	mobile to tv
Voice Assistant	google assistant, amazon alexa
Remote Control	magic, voice control
3D	no
Power Consumption	196 kilowatt hours
Depth with Stand	9.9 inches
Height with Stand	29.1 inches
Width with Stand	48.3 inches
Net Weight with Stand	50.7 pounds
Depth without Stand	1.8 inches
Height without Stand	27.8 inches
Net Weight without Stand	41.7 pounds