Test Transponder
Select the test Transponder you want to tune.
Set Limit
Set the motor movement to east or west to have the motor move only within the
direction set.
Go to 0
You can move the motor to Zero.
USALS : Set your current location (Longitude/Latitude).
To Use Manual Programme Tuning
General Programmes Programme Tuning (Programme Tuning &
Settings) Manual Tuning
This function is for manually searching and saving programmes.
For digital broadcasting, signal strength and signal quality can be checked.
Editing Transponder
General Programmes Programme Tuning & Settings Transponder
Edit
You can add / modify / delete a transponder.
This function only works when the programme mode is satellite.
If the System Operator provides ’user home TP edit’ feature, it will show the on the
screen.
So that you can set the desired Transponder as Home by pressing the .
(This feature is available on certain service provider only.)
Regional Programme
Continuous : The motor moves continuously until you press the Stop.
●
On : You can limit the movement to the current direction by selecting the West/East.
●
Off : You can cancel the limit you set.
●
To Next Page
Loading...
