18
Troubleshooting
Cannot control the TV with the remote control.
• Check the remote control sensor on the
product and try again.
• Check if there is any obstacle between the
product and the remote control.
• Check if the batteries are still working and
properly installed ( to , to ).
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a
wall outlet.
• Check if there is a problem in the wall outlet
by connecting other products.
The TV turns off suddenly.
• Check the power control settings. The power
supply may be interrupted.
• Check if the auto-off function is activated on
the settings related time.
• If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes
of inactivity.
When connecting to the PC (HDMI), no signal is
detected.
• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
Abnormal Display
• If the product feels cold to the touch, there
may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
product.
• This panel is an advanced product that
contains millions of pixels. You may see
tiny black dots and/or brightly coloured
dots (white, red, blue or green) at a size of
1 ppm on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
• You may find different brightness and colour
of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel.
It is not related with the product
performance, and it is not malfunction.
To Next Page
Loading...
