Adjust brightness level at the selected signal level(%)
The brightness of the selected signal level can be adjusted.
You can do these settings only when the Picture
Select Mode is the Cinema,
Expert (Bright space, daytime) or the Expert (Dark space, night) and when the
Method is set to 10 Points Signal Level(%) or 22 Points Signal Level(%).
Red / Green / Blue
Adjust the color temperature of the selected point.
Adjust the intensity of Red/Green/Blue in the range of -50 to 50.
You can adjust respective values for the brightness selected in Point.
Depending upon the input signal or the selected picture mode, the available options may
differ.
The configurable items differ depending upon model.
Adjusting the Contrast of a Picture
Picture Advanced Settings Clarity
You can adjust the contrast of a Picture to show it more clearly.
Adjust Sharpness
Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the
image will be.
Super Resolution
Adjusts the resolution to make dim and blurred images clearer.
Noise Reduction
Removes small dots that stand out so as to make the image clean.
MPEG Noise Reduction
Reduces the noise produced during the creation of digital video signals.
Smooth Gradation
It reduces the phenomenon that the outline of the image is rugged and in a staircase
To Next Page
Loading...
Need help?
General
