- 35 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
(7-1) Insert the DC Cable to connector.
* Match the color of label and cable. Fix the cable as below picture.
Insert the DC Cable Fixer and Screw the Screw (A) 1EA.
(7-2) Insert Cables to back of Stand, and pass the cable through the top cover hole. Insert Cable Fixer. Assemble
Stand Cable Cover. (Vertical, Horizontal each direction 1EA)
(7-3) Assemble the Main Cover and the Power Cover.
A
DC Cable Fixer
7-1
Matching color of Cable and Label
Fixing Cable
7-2
S ta n d
Cable Cover
S ta n d
Cable Cover
Cable Fixer
To Next Page
Loading...
