(5-1) Insert the Head into the Stand. ※ Be careful not to fit the DC Cable between the Head and the Stand. (If necessary, fix the DC Cable with tape before inserting the Head.)
(5-2) Screw the Shaft(C) 4EA. ※ If the head of the shaft does not protrude from the stand surface, it is normally fastened.
5-2
5-1
C
C
C
C
※ The head of the shaft does not protrude
from the stand surface.
If necessary, fix the DC Cable with tape
before inserting the Head.
Caution Cable
C
OLED88ZX Assemble Guide
To Next Page
Loading...
