LG OLED88ZX9LA - Page 32

(7-1) Insert the DC Cable to connector. ※ Match the color of label and cable. Fix the cable as below picture.
Insert the DC Cable Fixer and Screw the Screw (A) 1EA.
(7-2) Insert Cables to back of Stand, and pass the cable through the top cover hole. Insert Cable Fixer. Assemble Stand Cable Cover. (Vertical, Horizontal each direction 1EA)
(7-3) Assemble the Main Cover and the Power Cover.
OLED88ZX Assemble Guide
A
DC Cable Fixer
7-1
7-2
Stand
Cable Cover
Stand
Cable Cover
Matching color of Cable and Label
Fixing Cable
Cable Fixer
7-3
Copyright © 2020 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.