36
1 Touch > Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKS.
2 Touch the Menu key
> Wi-Fi Direct.
3 Select a device to connect from the scanned device list.
4 Touch OK.
NOTE: When you start Wi-Fi Direct, Wi-Fi connection will be disconnected.
Enabling Wi-Fi Direct to share through SmartShare
Wi-Fi Direct automatically scans nearby Wi-Fi Direct devices and the searched devices
are listed as they are found and you can select a specific device to share multimedia
data through Smart Share.
1 Touch
> Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKS.
2 Touch the Menu key
> Wi-Fi Direct.
3 Select a device to connect from the scanned device list.
CREA
TE GROUP– Touch to activate group owner mode, which enables the legacy
Wi-Fi devices to connect by scanning your phone. In this case you must enter the
password that is set in Password.
NOTE: When your phone becomes a group owner, it will consume more
battery power than when it is a client. Wi-Fi Direct connection does not
provide Internet service. Additional costs may be incurred when connecting
and using online services. Check data charges with your network provider.
Connecting to Networks and Devices
To Next Page
Loading...
