15
Getting to know your phone
Installing the Micro SIM card and battery
Before you can start exploring your new phone, you’ll need to set it up. To
insert the Micro SIM card and battery:
1. Hold the phone on your hand firmly. With the other hand, lift the back
cover using the fingertip cutout located on the bottom of the cover and
pull it up to remove it.
Fingertip cutout
2. Slide the Micro SIM card into the Micro SIM card slot. Make sure the
gold contact area on the card is facing downwards and the notched side
is inserted first (see image below).
3. Insert the battery into place by aligning the gold contacts on the phone
and the battery and press the battery down until it clicks into place .
To Next Page
Loading...
