- 4 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to PDP TV used PA11K Chassis.
V Specification
Each part is tested as below without special appointment.
(1) Temperature : 25 °C ± 5 °C (77 °F ± 9 °F), CST : 40 ± 5
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage: Standard Input voltage (100 V - 240 V ~, 50 / 60 Hz)
* Standard Voltage of each product is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
SBOM.
(5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
(1) Performance : LGE TV test method followed.
(2) Demanded other specification
Safety : CE, IEC specification, EMC : CE, IEC
V Module Specification
(1) 2D - 42” HD
No Item Specification Remark
1 Display Screen Device 106 cm (42 inch) wide Color Display Module PDP
2 Aspect Ratio 16:9
3 PDP Module PDP42T3####,
RGB Closed (Well) Type, Glass Filter (38%)
Pixel Format: 1024 horiz. By 768 ver
4 Operating Environment 1) Temp. : 0 deg ~ 40 deg
2) Humidity : 20 % ~ 80 %
5 Storage Environment 3) Temp. : -20 deg ~ 60 deg
LGE SPEC
4) Humidity : 10 % ~ 90 %
6 Input Voltage AC 100 V ~ 240 V, 50 / 60 Hz Maker LG
Model Name
42PT250-TA
Brand
LG
Market
Australia, New Zealand, Malaysia, Indonesia, Singapore
South Africa, Israel, Iran, Vietnam, Kenya, Non-EU analog
Model Name
42PT250-TA
Brand
Safety : IEC/EN60065
EMI : CISPR13
Market
Australia, New Zealand, Malaysia, Indonesia, Singapore
South Africa, Israel, Iran, Vietnam, Kenya, Non-EU analog
To Next Page
Loading...
Need help?
General
