49
CUSTOMIZING SETTINGS
OPTION Settings
1 Press the SETTINGS button.
2 Use the or button to select OPTION
and press the OK button.
3 Use the orbutton to set up a desired
item and press theOK button.
- To return to the previous menu, press the
button.
4 When you are fi nished, press EXIT.
The available option settings are described as follows.
Setting Description
Language Selects a desired Menu Language.
PJT
Mode
This function turns the projected image upside down or fl ips horizontal.
Select Rear when projecting from the back of the transparent screen
purchased separately.
Select Ceiling when installing the product on the ceiling.
When PJT Mode is Rear/Front Ceiling, the left/right of the speaker
changes automatically.
Auto
Keystone
Auto Keystone provides a rectangular screen image by automatically
adjusting the Keystone number when there is a trapezoidal screen image
caused by tilting of the projector.
Option
ON Automatically adjusts the Keystone number.
Off Manually adjusts the Keystone number.
Keystone To prevent the screen image from becoming trapezoidal, Keystone adjusts
the top and bottom width of the image if the projector is not set at a right
angle to the screen.
Blank
Image
Selects a background for blank Image. (see page22)
3D Mode Selects 3D mode.
Auto
Input
Search
Automatically searches and displays an input signal type when it is re-
ceived.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
