7
CAUTION when using this product in
environments of low humidity.
y
It may cause static electricity in environments
of low humidity.
y
It is recommended to use this product after
touching any metal object which conducts
electricity.
NOTICE: For safety marking information
including product identication and supply
ratings, please refer to the main label on the
bottom or the other surface of the product.
Symbols
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
For models using a battery
This device is equipped with a portable battery
or accumulator.
How to Safely remove the batteries or the
battery pack from the equipment:
To Remove
the old batteries or battery pack, follow the
assembly steps in reverse order. To prevent
contamination of the environment and bring
on possible threat to human and/or animal
health, the old batteries or the battery pack
must be put in an appropriate container at
designated collection points. Do not dispose
of batteries or battery pack together with
other waste. It is recommended that you use
local, free reimbursement systems batteries
or battery packs, (may not be available in
your area). The batteries or the battery pack
should not be exposed to excessive heat such
as sunshine, re or the like.
PK3.AUSALLK_SIM_MFL70582034.indd 7 2019-03-26 10:16:23
To Next Page
Loading...
Need help?
General
Weight and Dimensions
