4 _ Wired remote controller
Wired remote controller
Category Level1 Level2 Level3 DESCRIPTION
Lock
function
All lock (Child lock)
- -
It locks all button operation of the remote controller.
Individual lock
On/Off lock
-
It locks the On/Off button operation of the remote controller.
Mode lock
-
This function makes it impossible to change the operation mode from the wired remote control.
Set temp. range lock
-
It is the function that can limit the range of the desired temperature
Schedule &
Timer
Weekly schedule
- -
You can set up a weekly schedule.
Annual schedule
- -
You can set an annual schedule.
Holyday setting
- -
When the air conditioner is turned on at the set holiday, it is automatically turned off at
every hour.
In case of PREMTB001/PREMTBB01, You can set holidays based on the day of the week.
(Max 6 EA)
- For PREMTB100/PREMTBB10, You can set holidays by date.(Max 10 EA)
- For PREMTA(B/C)000, You can set holidays by date.(Max 20 EA)
Daily timer
On timer
-
You can turn on the air conditioner at certain times of the day.
- It is executed only once and is deactivated.
Off timer
-
You can turn off air conditioning at certain times of the day.
- It is executed only once and is deactivated.
Timer
Simple timer
-
After 1 to 7 hours of operation, the product can be turned on or off.
Sleep timer
-
After 1 to 7 hours of operation, the product can be turned on.
Human
Detection
function
Air flow setting
Human detected indirect wind
-
The vanes are controlled so that airflow does not go directly to the occupants according to
the occupant's position.
Human detected direct wind
-
Vane control for direct wind control is performed according to the occupant position.
Airflow based on activity
-
A vision sensor is used to detect the amount of activity in each zone and provide a cus-
tomized airflow.
Airflow for frequently used
areas
-
It provides cooling/heating airflow around the living area where the occupants are located
by using the Vision sensor.
Function setting Human detection mode
Saving operation
1) OFF
2) On-Off power
saving
3) Temperature
control
4)
Energy-saving
operation based
on activity
<Saving operation>
1) OFF : Not use the Human detection mode.
2) On-off power saving : If it is not detected for setting time, the product is turned off for
power saving.
3) Temperature control : If it is not detected for setting time, the product controls the desired
room temperature for power saving.
4) Energy-saving operation based on activity
Energy can be saved by controlling the set temperature based on the amount of activity.
Wind direction
1) OFF
2) Direct
3) Indirect
<Wind direction>
1) OFF :Do not use human detection wind direction control.
2) Direct : Direct wind operation based on human detection.
3) Indirect Indirect wind operation based on human detection.
Installer setting Human detection sensor
Installation status
Set the installation status & direction of human detection sensor.
*Not installed / basic installation / 90º rotation installation
Sensing Period
Set the detection period of the 'human detection sensor'.
*5 s (*Not recommend) / 30 s(Default) / 1 min. / 3 min.
Sensitivity
Set the sensitivity of the sensor.
*Standard / Low sensitivity / High sensitivity
Temperature
control option
This function selects whether to keep the operation state after the temperature saving oper-
ation is completed.
1) Step0 : Operation is maintained when temperature power saving is completed.
2) Step1 : Operation is stopped when temperature power saving is completed.
Detection areas
setting
12x6 (Default)
6x6 : Reduce the area in square mode to use the human body detection function.
Indoor floor area detection : This is a function to reduce the possibility of false detection due
to a narrow space or a person outside the windshield.
When the indoor floor area detection mode is used, only the
human body in the floor area detected by the floor area detec-
tion algorithm is selectively determined as a person.
To Next Page
Loading...
Need help?
General
