39
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
ACCESSORIES INSTALLATION
It is strongly recommended to attach the sensor to the wall by using the two screws.
The adhesive in double-sided tape may not be as long-lasting or as strong to sup-
port the sensor throughout its lifetime. Figure 42 shows where to attach the tape.
Double-sided
adhesive tape zone
Figure 42: Double-Sided Tape Installation
3. Ensure click sound is heard to verify sensor is secured to bracket and ensure
side tab of bracket is aligned with opening on side of sensor (Figure 43).
Figure 43: Secure Sensor to Bracket
ZigBee
To Next Page
Loading...
Need help?
General
