34 OPERATION
2 Locate the assembly slot a on the cup rack,
align the slot with the bar, and firmly pop the
rack off the support bar on that side.
• The rack on the left pops free at the back.
The rack on the right pops free at the front.
3 Slide the cup rack off the support bar on the
opposite side.
4 Follow the instructions in reverse to replace
the cup rack.
Folding Down the Upper Tines
Fold tines down to fit larger dishes; pull tines back
up to fit smaller dishes.
Loading Dishes & Pots
Height Adjustable Upper Rack
The upper rack adjusts up and down. Raise the
upper rack to allow items up to 14" tall in the lower
rack. Lower the upper rack to allow dishes up to
12" tall in the upper rack. The dishwasher ships
with the upper rack raised.
There are three available positions for adjusting
the height of the upper rack to create more space.
• Before adjusting, ensure the rack is empty of all
dishes. Otherwise dishes may get damaged or
you may get injured.
• Raise the upper rack without pushing the
buttons on each side. Pushing the buttons when
raising the rack will prevent the rack from
locking into position.
• To set the rack to the middle position, it may be
easier to lower the rack all the way down and
then raise each side of the rack individually until
it clicks into place.
• Before pushing the upper rack into the
dishwasher, ensure the rack height is the same
To Next Page
Loading...
Need help?
General
