38
206-4350
Ez Download Utility (Cont.)
(Continued from previous page)
8. To select a le:
• Use the arrow keys on the Installer Remote to select/highlight the appropriate le type eld,
and then press the Wheel (OK) button.
A list of available les is displayed to the right of the le type elds. In the case of image/
icon/video les, once you select the initial “Download Image File(s)” or “Download Icon
File(s)” or “Download Video File(s)” option, you will need to also select the appropriate type
or category of image/icon/video le (hotel directory image, hotel icon image, etc.) before
selecting the image/icon/video le(s) itself/themselves.
• Then, use the arrow keys to select the desired le(s).
Note: With the exception of hotel directory image les, the utility will only allow you to select one
of each le type for downloading. For example, if there are two les in the Ez Download “Import
Clone File” list, you can only select one or the other of those two les.
Note: The initial default value for each le type is “None.” After the Ez Download utility is run,
a le is automatically created and stored on the USB device that was used. The le, which
will have a “.dzm” le extension, maintains a history of the le(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
le(s) selected for the last download will be pre-selected for the current download, thus
facilitating the process of conguring additional TVs of this model using the same USB device.
If you ever want to restore the le selections on the Ez Download screen to “None,” select the
DESELECT ALL button on the screen and press the Wheel (OK) button on the Installer Remote.
Note: The current TV software (CPU) or PTC software version is always displayed above the
listing of available TV software and PTC software les, respectively. Ensure the software version
of the selected le is the correct version before applying the update to this TV.
Note: You can select the
(STORAGE) button at the top of the Ez Download screen to check
the amount of storage available for and currently in use by media (image, icon, and video)
les. Storage data will be displayed in a pop-up window. When you are nished, select OK to
close the pop-up window. If you would like to clear all of the media les currently in storage,
select the CLEAR STORAGE button. Then, in the conrmation pop-up window, select YES to
clear all of the media les, or select NO to return to the Ez Download screen without clearing the
media les.
9. If a Clone/Conguration (.tlx) le that includes an FTG Channel Map is selected, a Channel
Tuning / Channel Banner Display eld will be displayed at the right of the screen. If the FTG
Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0
through 137-0), you can choose the format for the channel tuning/banner display. Use the
arrow keys on the Installer Remote to select Logical tuning or Physical tuning. A checkmark
will appear at the left of the selected option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if
the selected “.tlx” le does not include an FTG Channel Map, the message, “No Channel Map
in Clone le,” will be displayed at the right of the screen.
(Continued on next page)
To Next Page
Loading...
